Setting The Device - Samsung XRN-1610S User Manual

menu setup

SettIng the DeVICe

You can configure settings related to camera, storage media, monitor and text.
Camera
to register a camera
You can register a network camera for each channel and make connection between.
• Preview : View the video of the channel as a current image.
Camera searched with ONVIF does not provide previews.
`
• Protocol : Show the protocol information of a registered network camera.
• Model : Show the camera model name.
• IP Address : Display the IP address of a network camera.
• Connection : Display the connection status.
• Data Rate : Displays the total amount of data received by the channel.
• PoE Status : Displays connected PoE status information.(XRN-1610S)
• ONVIF Setup : You can additionally set up ONVIF protocol camera.
• Error code guides : You can check the details of generated error codes.
If the NVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras.
`
M
For more information on network settings, refer to "Network Configuration". (Page 45)
If you want to register a camera in pnp mode (XRn-1610S)
When you connect a camera in PnP mode, the initial ID, password and DHCP mode should be set in advance.
`
J
Samsung cameras are registered for Samsung protocols and other cameras are registered by using the Onvif protocol.
`
In PnP mode, you cannot connect a device that runs the DHCP server in PoE port or camera setting port. (Ex: hub)
`
32_ menu setup
to auto-search for and register a network camera
1. In the <Cam Registration> field, click on the <Auto> button.
2. Search for a network camera connected.
An already registered camera will be marked in blue in the list.
`
If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as -192.168.1.100),
`
then press the < > button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to assign
the IP manually.
3. Select a camera from the camera list to see a preview of its current video feed.
Camera searched with ONVIF does not provide previews.
`
4. Check the checkbox next to a network camera that you want to connect to.
You can select all of the network cameras in the list and provide <ID> and <Password> all at once.
`
Click a header at the top of the list to sort the list according to that header.
`
Registering camera with user account other than admin may restrict camera function.
`
J
When you change the camera ID/password in the camera web viewer, if the camera is already registered in NVR, you also
`
have to change the camera ID/passowrd information registered in NVR.
5. Click on the <ID/pW> button to enter the selected network camera's <ID> and <password>.
6. Press the <Connection test> button to make a connection to a camera.
7. Press <Register> to register the selected camera.