Zoom - Samsung XRN-1610S User Manual

CH13 CH13 CH14 CH14 CH15 CH15
CH16 CH16
Switching to Single mode
CH5 CH6 CH9 CH10
CH5 CH6 CH9 CH10
When in split mode, select and double-click a desired channel to switch to its Single mode.
CH7 CH7 CH8 CH8 CH11 CH11 CH12 CH12
Ex : If double-clicking CH 3.
`
CH1 CH2 CH3 CH4
CH1 CH2 CH3 CH4
;
CH5 CH5 CH6 CH6 CH7 CH7 CH8 CH8
CH9 CH9 CH10 CH10 CH11 CH11 CH12 CH12
CH13 CH13 CH14 CH14 CH15 CH15 CH16 CH16 CH3 CH3
Live Status
CH7 CH7 CH2 CH2 CH3 CH3 CH4 CH4
Select <Live Status> from the live screen menu to display status and transfer information of connected camera CH5 CH5 CH6 CH6 CH1 CH1 CH8 CH8
to each channel.
CH9 CH9 CH10 CH10 CH11 CH11 CH12 CH12
• Model : Displays the camera model name connected to each
CH13 CH13 CH14 CH14 CH15 CH15 CH16 CH16
channel.
• Status : Displays the status of camera connection set to each
channel.
• IP Address : Displays the IP address of a camera set to each
channel.
• Codec : Displays the live profile codec information for a
camera set to each channel.
• Resolution : Displays the live profile resolution of a camera set
to each channel.
• Frame Rate : Displays the live profile transmission rate for a camera set to each channel.
• Quality : Displays the live profile transmission quality of a camera set to each channel.
record Status
Select <record Status> from the live screen menu to display camera profile, input/recording frame rates,
input/limit/recording bps of each channel.
• Total Bitrate (Record/Max) : Record bitrate shows the amount
of actual data recording while Total bitrate shows the
maximum data transfer allowed by the NVR.
• Profile : Shows the video profile configured to each channel.
• Frame (fps) : Show the input/record frames per second for
each channel.
• Bitrate (bps)
- Limit / Input / Record : Shows the amount of limit/input/
recording data for each channel.
- Input / Limit : Shows the data ratio of actual data transferred from the camera and allowed maximum
defined by user.
• Current : Shows the recording status information of currently transferred data.
• MAX : Shows recording information of the most biggest recording data out of configured standard and event
recordings.
CH13 CH14
CH13 CH14
CH15 CH15 CH16 CH16
CH1 CH1 CH2 CH2
CH1 CH1
• : Reloads the recording information.
• Record Setup : The menu screen will switch to the record setting screen.
The warning message on the list's bottom means the NVR replaced the selected recording profile with other available profile,
`
M
since the selected one does not produce video data which prohibits screen saving. If the screen displays video, it
automatically resets to the selected profile and its name turns to yellow in the list.
If Key Frame recording exceeds the allowed data amount specified by limit bitrate, a popup alert and icon appear on the
`
screen.
The limited recording alert popup does not repeat after displaying once unless camera or recording settings are changed; it
may appear again if settings were changed to notify such status.
If you want to set the alert popup not to appear, change your setting of <Setup Warnings> not to display a message popup.
For further information on bitrate limit of recording data, refer to "Record Setting". (Page 41)

Zoom

This is activated only in Live Single mode.
After selecting a single screen, if you use the Magnify function, the selected area will be magnified by 3.
1. In the live screen menu, select <Zoom>.
You can also click on < > in the launcher menu.
The Magnify icon in the middle of the screen will be displayed.
2. Drag and drop with your mouse to select the area to magnify.
3. Double click on it to magnify the selected area by 3.
In the magnified screen, you can drag and drop the selected area for magnification.
`
4. In the live screen menu, select <Zoom out>.
Click on < > in the launcher menu to release the magnification function.
<Normal>
;
<Enlarged 3x>
English _21