Audio On/Off; Freeze; Event Monitoring; Capture - Samsung XRN-1610S User Manual

CH3
CH1 CH2
CH6 CH1

audIo on/off

CH9 CH3 CH4 CH4 CH5
You can turn the sound on/off corresponding to the channel in Live mode.
audIo on/off in Single mode
Click on the audio icon ( ) on the screen to turn it ON/OFF.
CH5
If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network
CH7 `
M
camera supports the sound signal and if you have configured the sound settings as appropriate.
CH19
The sound icon can be displayed if the sound signal fails to output from noise.
CH2
CH13 CH1 CH1
Only the channel where <AUDIO> is set to <ON> in "Setting the Device > Camera" displays the audio icon (
`
mode that you can use to turn the sound on/off.

freeZe

This is available only in Live mode, this pauses playing the Live image temporarily.
CH3
1. Click <
> of the launcher mode.
CH1 CH2
Video playing is paused.
CH6
2. Click on <
>.
Pause is canceled. Playing is resumed.
CH9 CH3 CH4

event monItorIng

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In "monitor > event display", set the event monitoring to ON/OFF and specify the event display time. (Page 40)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
- 10~16 events : 16-split mode
• If the second event occurs within the set time of <event display>, the first event will last until the second one
is terminated.
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
CH10 CH13 CH14
`
Event occurrence
CH12 CH15 CH16
CH1
CH13 CH14 CH15
CH16
CH2
CH16
CH3
CH6
CH5 CH6
CH5 CH6
CH7 CH8
CH7 CH8
CH1 CH2 CH3 CH4
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16
CH13 CH14 CH15 CH16
CH7 CH2 CH3 CH4
CH7 CH2 CH3 CH4
CH5 CH6 CH1 CH8
CH5 CH6 CH1 CH8
CH9 CH10 CH11 CH12
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16
CH13 CH14 CH15 CH16
5 seconds
Stop alarm
CH1 CH2
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event
`
CH9 CH10 CH13
occurred in CH 1.
CH9 CH10 CH13 CH14
Event occurrence
CH11 CH12 CH15
CH11 CH12 CH15 CH16
) in Live
CH3 CH1
CH3 CH1
Select <Stop Alarm> to initialize the status of alarm output and release the event function.
`
M
If an alarm is output with the pre-event and post-event times specified together with the event recording settings, the event
`
recording will perform according to the specified recording type (pre event or post event).
In case of continuous events such as motion detection, switching to another split mode display may not immediate if
`
J
concatenating events follow, even when you stopped alarm of the event.
The video may be delayed depending on the network condition.
`
The event output can be delayed as the transfer of the alarm event from the network camera takes time.
`

capture

You can capture a screen selected on the live screen.
Function to perform in single channel mode on the live screen or when selecting a channel.
1. Select <capture> from the live screen menu.
You can click on <
2. Select the output information to be displayed on the captured screen.
When you select the <Description> check box, a window to enter a description is opened and you can enter up to 50 Korean
`
letters.
3. Select a device to save a captured file, file path and file name.
4. Complete the settings and click <oK>, then the image captured from the screen is saved to the selected
device.
CH14
4 seconds 9 seconds
CH16
Stop alarm
CH1 CH2
CH1 CH2
> in the launcher menu.
English _23