Samsung XRN-1610S User Manual page 67

Channel Setup
You can configure the video settings for each channel.
Storage device
You can check and change the settings related to the data storage device.
device/format
You can check a storage device, amount of use, type of use
and status of storage device.
• ARB : Video that was not recorded due to disconnection from
the camera can be backed up after the connection with the
camera is re-established.
Press the button and an <Auto recovery Backup> window
is opened.
For more information about settings, please refer to "device/
Format". (Page 37)
iSCSI
If you connect NVR with an iSCSI device, you can search,
connect or disconnect the iSCSI device.
Hdd Alarm
You can set the alarm output port and the duration in case an
error occurs.
monitor
monitor
You can configure the monitoring screen settings and set the
output system.
If the video is not played properly, refer to the troubleshooting
`
M
section later in this manual. (Page 78)
The Monitor Setup settings control the monitor connected to the
`
NVR.
English _67