Samsung XRN-1610S User Manual page 36

menu setup
Setting Camera password
You can change the passwords of all registered cameras at once.
• New P/W : Input a new password according to the password setting rules.
• Confirm P/W : Input the new password again.
If you click < >, a basic guide for password setup is displayed.
`
M
If <View password> is selected, the password is no longer hidden on the screen when you type it.
`
A camera password registered with ONVIF and RTSP cannot be changed.
`
password setting guide
The length and limitations of a password are as follows.
- Uppercase letters/lowercase letters/numbers/special characters, containing at least 3 out of the 4 character
types mentioned: 8 or 9 digit combination
- Uppercase letters/lowercase letters/numbers/special characters, containing at least 2 out of the 4 character
types mentioned: 10 to 15 digit combination
- The password shall not be identical to the user ID.
- To enhance security, it is not recommended to use repeated digits or letters, or keyboard patterns as a
password.
- Special characters accepted for a password : ~`!@#$%^*()_-+=|{}[].?/
36_ menu setup
Live Setting
You can change the live transfer settings of the network camera.
• Live Replacement : You can select the live profile setup mode.
If you select <manual>, the profile setup items are enabled, and you can change settings manually.
- Auto : In case of split mode, the profile for live monitoring shows the Live4NVR profile(basic: H.264 800*600
30fps) created at the time of registration and it automatically selects the second profile in case of single
mode.
- Manual : Live monitoring is performed with the profile selected by the user from the registered camera
profiles.
- Record : Live monitoring is performed with the profile set for recording.
• Profile : You can select the video profile of the connected camera setting.
• Codec : Show the codec of the selected profile.
• Resolution : Show the resolution of the selected profile.
• Frame Rate : Show the frame rate of the selected profile.
• Quality : Show the quality of transfer video of the selected profile.
Channel Setting
You can configure the video settings for each channel.
• Apply to CH : If you select <Apply to Ch>, the "Apply to Ch" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
• Video
- <On/OFF> : You can turn ON/OFF the selected channel's camera.
- <Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.