Samsung XRN-1610S User Manual page 72

setup viewer
dHCP Server
network
You can set the internal DHCP server and assign an IP address
to the network camera.
Check IP
You can check the IP and MAC currently used through the
DHCP server, and the connected network port.
Using the setting icons
In PnP mode no Quick setup icon.
: If the button is selected, you can turn on/off the function
•
to query text devices and data that are located in a separate
area.
: Display the ID of user connected.
•
72_ setup viewer
: You can register a network camera for each channel
•
and easily set the resolution and the number of shots in case
of event occurrence or manaual recording.
For more on how to register a camera, refer to "To register a camera".
`
(Page 32)
If the failover mode is in a standby state, <Quick Setup> item is
`
hidden.
: You can manually enter the desired backup channel
•
and time/date to backup the recorded video.
You can select whether or not to "Text data included" for SEC format.
`
: You can check the recording status and the status of
•
camera connected.
- Live : Select <Live> to check the status of camera
connected to each channel and the transmission
information.
- Recording : Select <record> to check the following for
each channel : profile, recording type, inputs / recording
transmission rate, settings / inputs / amount of recorded
data.
- PoE : Select <Poe> to check the consumption by PoE
connected to each channel.
Click on < > to move to Device > Camera >
`
Camera Registration.
For more on camera registration, refer to "To register a camera".
(Page 70)
Only XRN-1610S supports PoE status.
`
• < > : You will be immediately directed to the homepage
of Hanwha Techwin.