Setting The Recording - Samsung XRN-1610S User Manual

Table of Contents

Advertisement

• Encoding type : Select an encoding type to use from a list.
- You can select starting and ending character strings.
General characters, special characters, and Hex codes (e.g. 0x12, 0x34) can be used for character strings.
`
M
Equipment connected to NVR uses TCP/IP communication protocol.
`
J
event Settings
You can set up event keywords.
• Total amount : Set a total amount condition to receive alarms.
• Keyword : If the <Add> button is clicked, a screen to add keywords pops up. If you select one of the added
keywords to delete and click the <Delete> button, the selected keyword will be deleted.

SettIng the ReCORDIng

You can setup scheduled recording, event recording and other recording related settings.
Recording Schedule
Make your reservation on a date and time to schedule the recording on specified time.
• All : The entire time range (Monday through Sunday including holidays, AM 0~ PM 23) will be reserved with
the same recording schedule
• Apply to CH : If you select <Apply to Ch>, the "Apply to Ch" confirmation pop-up window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
Event recording and scheduled recording starts about 3 seconds prior to the event/schedule for guaranteed recording.
`
M
Record setting by the color
Color
Function
No Color
No Recording
Green
Continuous
Orange
Event
White
Both(Cont&Evnt)
Each press of a selected cell will cycle through <no Recording>-<Continuous>-<event>-<Both(Cont&evnt)>.
Recording performance spec for the hDD condition
No
HDD condition
1
HDD for CE
2
HDD for CE
3
HDD for Server
4
HDD for Server
Record Setting
You can set resolution, FPS, and quality of recordings by channel, and by recording type of standard / event.
You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel,
and set the transfer limit for recordings.
• Apply to CH : If you select <Apply to Ch>, the "Apply to Ch" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
• Standard, Event : Configures Standard recording and Event recording.
- FULL : Records all frames fed by the camera.
- KEY : Records only key frames fed by the camera.
Actual recording rate may differ from camera settings. In general, 1 to 2 frames per second are recorded.
- OFF : No recording is made.
• Frame
- FULL : Shows the amount of data for all the scene recordings.
- KEY : Shows the amount of data for the main scene recordings.
• Limit : Set the amount of data allowed for input for each channel.
Description
No schedule / event recording
Scheduled recording only
Event recording only
Both scheduled / event recordings
Recording (Mbps)
Receiving (Mbps)
Internal
iSCSI
256
256
-
100
100
-
256
256
256
100
100
100
English _41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrn-1610

Table of Contents