ProCurve 6200yl Management And Configuration Manual page 67

Asterisk
indicates a
configuration
change that
requires a
reboot in order
to take effect.
Reminder to
reboot the
switch to
activate
configuration
changes.
N o t e
Rebooting To Activate Configuration Changes. Configuration changes
for most parameters in the menu interface become effective as soon as you
save them. However, you must reboot the switch in order to implement a
change in the
Maximum VLANs to support parameter
to the Main Menu and select:
2. Switch Configuration
8. VLAN Menu
1. VLAN Support
If you make configuration changes in the menu interface that require a reboot,
the switch displays an asterisk (*) next to the menu item in which the change
has been made. For example, if you change and save the value for the Maximum
VLANs to support parameter, an asterisk appears next to the VLAN Support entry
in the VLAN Menu screen, and also next to the Switch Configuration entry in
the Main Menu.
Figure 3-7. Indication of a Configuration Change Requiring a Reboot
To activate changes indicated by the asterisk, go to the Main Menu and select
the Reboot Switch option.
Executing the write memory command in the CLI does not affect pending
configuration changes indicated by an asterisk in the menu interface. That is,
only a reboot from the menu interface or a boot or reload command from the
CLI will activate a pending configuration change indicated by an asterisk.
. (To access this parameter, go
.
Using the Menu Interface
Rebooting the Switch
3-13