Example Of Configuring And Displaying A Banner - ProCurve 6200yl Management And Configuration Manual

Selecting a Management Interface
Advantages of Using ProCurve Manager or ProCurve Manager Plus
2-12
< banner-text-string >
The switch allows up to 320 banner characters, including
blank spaces and CR-LF ([Enter]). (The tilde "
delimiter defined by banner motd <delimiter> are not
allowed as part of the banner text.) While entering banner
text, you can backspace to edit the current line (that is, a
line that has not been terminated by a CR-LF.) However,
terminating a line in a banner by entering a CR-LF
prevents any further editing of that line. To edit a line in
a banner entry after terminating the line with a CR-LF
requires entering the delimiter described above and then
re-configuring new banner text.
The banner text string must terminate with the character
defined by banner motd < delimiter >.

Example of Configuring and Displaying a Banner

Suppose a system operator wanted to configure the following banner message
on her company's switches:
This is a private system maintained by the
Allied Widget Corporation.
Unauthorized use of this system can result in
civil and criminal penalties!
In this case, the operator will use the [Enter] key to create line breaks, blank
spaces for line centering, and the % symbol to terminate the banner message.
Figure 1. Example of Configuring a Login Banner
To view the current banner configuration, use either the show banner motd or
show running command.
~
" and the