Related Publications - ProCurve 6200yl Management And Configuration Manual

Power Over Ethernet (PoE) Operation
Introduction to PoE
11-6
Enable or disable PoE operation on individual ports. (In the default
■
configuration, each PoE module installed in the switch enables PoE
power on all Gig-T ports in the module, subject to PoE priority if the
PoE resources are oversubscribed.)
Monitor PoE status and performance per module.
■

Related Publications

This chapter introduces general PoE operation, PoE configuration and mon-
itoring commands, and Event Log messages related to PoE operation on
ProCurve Series 5400zl and ProCurve Series 3500yl switches. The following
two manuals provide further information:
■ For information on installing a ProCurve Switch 5400zl 24-port
Gig-T PoE Module (J8702A), refer to the ProCurve Switch Modules
Installation Guide provided with the module.
■ To help you plan and implement a PoE system in your network, refer
to the PoE Planning and Implementation Guide, which is available
on the ProCurve Networking web site at www.procurve.com. (Click on
technical support, then Product manuals (all).)
The latest version of any ProCurve product guide is always on the ProCurve
Networking web site. Refer to "Getting Documentation From the Web" on
page 1-7.