ProCurve 6200yl Management And Configuration Manual page 509

— Continued from Preceding Page—
mirror < 1 - 4 | < name-str >: Assigns the traffic defined by the
interface and direction to a session by number or (if
configured) by name. (The session must have been
previously configured. Refer to "3. Configure the Mirroring
Session on the Source Switch" on page B-44.) Depending on
how many sessions are already configured on the switch,
you can use the same command to assign the specified
source to up to four numeric or alphanumeric identifiers.
For example, 1 2 4 . For limits on configuring mirroring
sources to a given session, refer to "Mirroring Source
Limits" on page B-47.
< 1 - 4 > : Assigns a numeric session identifier to
associate with the traffic selected for mirroring by this
command.
[ name < name-str >] : Optional; uses a previously
configured alphanumeric identifier to associate the
traffic source with the mirroring session. The string
can be used interchangeably with the mirroring
session number when using this command to assign
a mirroring source to a session. To configure an
alphanumeric name for a mirroring session refer to
the command description under "Configuring a
Source Switch for a Mirroring Destination on a
Remote Switch" on page B-45.
Monitoring and Analyzing Switch Operation
Traffic Mirroring
B-49