ProCurve 6200yl Management And Configuration Manual page 375

ProCurve# show sflow 2 sampling-polling A1-A4
Port | Sampling
| Enabled
----- + -------- -------- ------
A1 Yes(2)
A2 ---
A3 No(1)
A4 Yes(3)
N o t e
The show sflow <instance> sampling-polling [port-list] command displays infor-
mation about sFlow sampling and polling on the switch. You can specify a list
or range of ports for which to view sampling information.
Number denotes the sampling/polling instance to which the receiver is coupled.
Rate Header
40 128
--- ---
0 100
50 128
Figure 3. Example of Viewing sFlow Sampling and Polling Information
The sampling and polling instances (noted in parentheses) coupled to a
specific receiver instance are assigned dynamically, and so the instance
numbers may not always match. The key thing to note is whether sampling or
polling is enabled on a port, and the sampling rates or polling intervals for the
receiver instance configured on each port.
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Dropped | Polling
Samples |
---------- +
1234567890
0 Yes(1)
898703
0
Enabled Interval
------- --------
--- ---
60
No 30
No(3) 0
14-31