Primary Or Secondary Flash - ProCurve 6200yl Management And Configuration Manual

Continue reboot of system? : No
Press the space bar once to change No to Yes, then press
the reboot.
7. To confirm that the software downloaded correctly:
a. From the Main Menu, select
1. Status and Counters
1. General System Information
b. Check the Firmware revision line.
CLI: Xmodem Download from a PC or UNIX Workstation to

Primary or Secondary Flash

Using Xmodem and a terminal emulator, you can download a software file to
either primary or secondary flash.
Syntax: copy xmodem flash [< primary | secondary >]
Downloads a software file to primary or secondary flash. If
you do not specify the flash destination, the Xmodem
download defaults to primary flash.
For example, to download a switch software file named E0822.swi from a PC
(running a terminal emulator program such as HyperTerminal) to primary
flash:
1. Execute the following command in the CLI:
2. Execute the terminal emulator commands to begin the Xmodem transfer.
For example, using HyperTerminal:
Click on Transfer, then Send File.
a.
b. Type the file path and name in the Filename field.
c. In the Protocol field, select Xmodem.
d. Click on the
[Send]
The download can take several minutes, depending on the baud rate used
in the transfer.
button.
File Transfers
Downloading Switch Software
[Enter] to begin
A-17