Konica Minolta bizhub C3350 User Manual page 110

2.9 Registering a destination
Settings
[Original Direction]
[2-Sided Binding Direc-
tion]
[Special Original]
[Timer TX]
[Password TX]
[F-Code]
[Document Name]
[Frame Erase]
[Applied Functions]
Description
When scanning a double-sided original, you can specify the original loading di-
rection so that the vertical direction is set correctly after scanning.
[Left] is specified by default.
Select the biding position of original when scanning both sides of the original.
[Auto] is specified by default.
Select [Long Original] to scan a long original.
[Normal] is specified by default.
To set a time to start fax transmission, select [On]. Also, specify when to start
fax transmission.
[Off] is specified by default.
To send fax with a password to a destination for which fax destinations are re-
stricted by passwords (Closed Network RX enabled), select [On]. Also, enter
the password.
[Off] is specified by default.
Select [Enable] to enable F-Code TX. Also enter [SUB Address] and [Pass-
word].
[Disable] is specified by default.
If necessary, change the file name of the scanned original.
Erases an area of an identical specified width along the four sides of an origi-
nal. You can erase the four sides of the original to different widths.
[Off] is specified by default.
2
2-32