[Tcp Socket Settings] - Konica Minolta bizhub C3350 User Manual

1.5 Available operations in Administrator mode
Item
[Proxy]
[Proxy Server Ad-
dress]
[Proxy Server Port
Number (HTTP)]
[Proxy Server Port
Number (HTTPS)]
[Proxy Server Port
Number (FTP)]
[Proxy Server User
Name]
[Proxy Server Pass-
word]
[Specified Application
Start Setting]
[Specified Applica-
tion]
[Default Application
Selection]
[Basic Functions
Setting]

[TCP Socket Settings]

To display: Administrator mode - [Network] - [TCP Socket Settings] - [TCP Socket Settings]
Configure the TCP Socket operating environment.
Item
[TCP Socket]
[Port Number]
[SSL/TLS]
[Port Number
(SSL/TLS)]
[Applied Functions]
Description
Configure a setting for the required proxy server if you want associate this ma-
chine with a different system that supports OpenAPI.
Enter the proxy server address.
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
If necessary, change the proxy server port number for HTTP.
[8080] is specified by default.
If necessary, change the proxy server port number for HTTPS.
[8080] is specified by default.
If necessary, change the proxy server port number for FTP.
[21] is specified by default.
Enter the user name to log in to the proxy server (using ASCII characters of up
to 63 bytes).
Enter the password (using ASCII characters of up to 63 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Configure settings for starting the OpenAPI application if you are using an
OpenAPI application.
Select whether or not to launch only the pre-specified OpenAPI application
when this machine has started up.
[Disable] is specified by default.
Note
When the OpenAPI application is selected in [Default Application Selection],
the setting can be changed.
When you use this function, specify the OpenAPI application to be launched.
[None] is selected by default.
When using this function, select whether or not to use the basic functions of
this machine.
[Restrict] is specified by default.
Description
Select whether or not to use TCP Socket on this machine.
[Enable] is specified by default.
If necessary, change the TCP Socket port number.
[59158] is specified by default.
Select whether or not to use SSL for a communication via TCP Socket.
This setting is available when the certification of this machine is registered.
[Non-SSL Only] is specified by default.
Note
When [Security] - [PKI Settings] - [SSL/TLS Settings] - [SSL/TLS] is set to [En-
able], the setting can be changed.
If necessary, change the SSL communication port number.
[59159] is specified by default.
1
1-69