[Job Log] - [Erase Job Log]; [Sender Registration]; [License Settings] - [Enabler]; [Qr Code Settings] - Konica Minolta bizhub C3350 User Manual

1.5 Available operations in Administrator mode

[Job Log] - [Erase Job Log]

To display: Administrator mode - [System] - [Job Log] - [Erase Job Log]
Deletes a job log file on this machine.

[Sender Registration]

To display: Administrator mode - [System] - [Sender Registration] - [Sender Registration]
Enter the machine name, your company name (sender name) that are to be printed as sender information
when faxes are transmitted (using up to 30 bytes).
Tips
To use fax functions, optional units must be installed except in certain regions.
- For bizhub C3850FS or bizhub C3850: The optional Fax Kit FK-512 and Mount Kit MK-738 are re-
quired, excluding models used in North America.
- For bizhub C3350: The optional Fax Kit FK-512 and Mount Kit MK-738 are required.

[License Settings] - [Enabler]

To display: Administrator mode - [System] - [License Settings] - [Enabler]
Register the function and license code, which were obtained from the License Management Server, with this
machine and enable the expansion function.

[QR Code Settings]

To display: Administrator Mode - [System] - [QR Code Settings]
Configure a setting to display network information of this machine, which is required to associate with a mo-
bile terminal, as the QR code on the screen of this machine.
Item
[Display Setting]
[Wireless Connection
Setting]
[Wireless Connection
Method]
[Individual Settings]
[Applied Functions]
Description
Select whether to display the QR code on the screen of this machine.
[Not Display] is specified by default.
Select whether to specify a method to establish a wireless connection between
a mobile terminal and this machine.
The information specified in this option is applied to the QR code.
[Not Set] is specified by default.
Select whether to use the MFP wireless settings or individually specify the ap-
propriate method to establish a wireless connection between a mobile terminal
and this machine.
[Use Device Wireless Setting] is specified by default.
Specify the method to establish a wireless connection if [Individual Settings] is
selected in [Wireless Connection Method].
• [SSID]: Enter the SSID of the access point (using up to 32 bytes).
• [Authentication/Encryption Algorithm]: Select the algorithm used for au-
thentication or encryption. [No Authentication/Encryption] is specified by
default.
Select the algorithm that is used for authentication or encryption. [None] is
specified by default.
• [WEP Key]: This is required when [WEP] is selected in [Authentication/En-
cryption Algorithm]. In [Key Input Method], select the entry method, then
enter the WEP key.
• [Pass Phrase]: This is required when an algorithm other than [WEP] is se-
lected in [Authentication/Encryption Algorithm]. In [Pass Phrase Input
Method], select the entry method, then enter the passphrase.
1
1-18