2.7
Configuring the Internet fax operating environment
3
Set the POP over SSL and APOP settings according to your environment. In the administrator mode,
select [Network] - [E-mail Settings] - [E-mail RX (POP)], then configure the following settings.
Settings
[SSL/TLS]
[Port Number (SSL)]
[APOP Authentication]
[Applied Functions]
Description
When using SSL to encrypt a communication with the E-mail server (POP), se-
lect [Enable].
[Disable] is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[995] is specified by default.
If you use APOP in your E-mail server (POP), select [Enable].
[Disable] is specified by default.
2
2-22