Konica Minolta bizhub C3350 User Manual page 58

1.5 Available operations in Administrator mode
Item
[WEP Key]
[Pass Phrase Input
Method]
[Pass Phrase]
[Pass Phrase Automatic
Renewal]
[Renewal Period]
[Enable 2040COEX]
[Wireless Channel]
[ANY Connection]
[DHCP Server]
[IPv4 Lease Address]
[Subnet Mask]
[Lease Period]
[MAC Address Filtering]
[Concurrent Connec-
tion Device Setting]
[Radio Field Intensity
Setting]
[Connected Device Dis-
play Setting]
[TCP/IP Settings]
[IPv4 Settings]
[IPv6 Settings]
[Applied Functions]
Description
Specify the WEP key when [WEP] is selected in [Authentication/Encryption Al-
gorithm].
• [Key Input Method]: Select a WEP key input method. [Text 5 Characters] is
specified by default.
• [Select Key]: Select the required one of the WEP keys registered using
[WEP Key 1] to [WEP Key 4]. [1] is specified by default.
• [WEP Key 1] to [WEP Key 4]: Enter WEP keys.
Select a passphrase entry method when an algorithm other than [WEP] is se-
lected in [Authentication/Encryption Algorithm].
[Text 8-63 Characters] is specified by default.
Enter the passphrase when an algorithm other than [WEP] is selected in [Au-
thentication/Encryption Algorithm] (using up to 64 byte ASCII characters).
Select whether or not to automatically update the passphrase.
[Enable] is specified by default.
Specify the interval to update the passphrase.
[60] minutes is specified by default.
Select [Enable] to attempt high-speed communication at 40 MHz.
[Disable] is specified by default.
Set a wireless LAN channel.
[Auto] is specified by default.
Select whether or not to allow ANY connection.
[Enable] is specified by default.
Select whether to use the DHCP server function.
[Enable] is specified by default.
Specify the range of the IPv4 address to be leased by the DHCP server when
[Enable] is selected in [DHCP Server].
• [Start Address]: Enter the IP address at the head.
• [End Address]: Enter the IP address at the end.
Enter the subnet mask when [Enable] is selected in [DHCP Server].
Enter the lease period when [Enable] is selected in [DHCP Server].
[4294967295] seconds is specified by default.
Restricts wireless LAN adapters that can be connected to the access point us-
ing the MAC address.
Enter the MAC addresses of wireless LAN adapters that can be connected to
the access point. MAC addresses of up to 16 devices can be registered.
This option is displayed if [Ethernet+Wireless LAN (AP mode)] is selected in
[Network Type].
Enter the number of devices that can be connected simultaneously to the ac-
cess point.
[5] devices is specified by default.
Select the radio field intensity of the access point from three levels (Weak, Mid-
dle, and Strong).
[Strong] is specified by default.
Displays a list of names and MAC addresses of wireless LAN adapters that are
connected to the access point.
Configure settings to connect this machine to the network using TCP/IP.
Configure IPv4 settings to connect this machine to the wireless network using
IPv4.
• [IP Address]: Enter the fixed IP address assigned to the machine.
• [Subnet Mask]: Enter the subnet mask.
Configure IPv6 settings to connect this machine to the wireless network using
IPv6.
• [Link Local Address]: Displays the link-local address. The link-local address
is automatically specified from the MAC address of this machine.
1
1-52