Side Tray (D635)
2.14.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
If you will install the 1-bin tray (D632) on the machine, install the 1-bin tray first before
installing the side tray (D635). This makes it easier to do the following procedure.
1.
Remove all tapes.
2.
If the sensor feeler [A] is out, fold it into the machine.
3.
Open the right door of the machine.
4.
Remove the inner tray [A].
5.
Remove the front right cover [B] (
6.
Remove the connector cover [C] (
D129/D130
x 1).
x 1).
2-58
SM