Ricoh D129 Service Manual page 728

System SP Tables-5
5828 Network Setting
IPv4 Address (Ethernet/IEEE 802.11)
001
This SP allows you to check and reset the IPv4 address for Ethernet and
wireless LAN (802.11): aaa.bbb.ccc.ddd
IPv4 Subnet Mask (Ethernet/IEEE 802.11)
002
This SP allows you to check and reset the IPv4 subnet mask for Ethernet
and wireless LAN (802.11): aaa.bbb.ccc.ddd
IPv4 Default Gateway (Ethernet/IEEE 802.11)
003
This SP allows you to check and reset the IPv4 default gateway used by the
network for Ethernet and wireless LAN (802.11): aaa.bbb.ccc.ddd
DHCP (Ethernet/IEEE 802.11)
This SP code allows you check and change the setting that determines
whether the IP address is used with DHCP on an Ethernet or wireless
006
(802.11) LAN network.
[0 to 1 / 1 / 1]
0: Not used (manual setting)
1: Used
Active IPv4 Address
021
This SP allows you to check the IPv4 address that was used when the
machine started up with DHCP.
Active IPv4 Subnet Mask
022
This SP allows you to check the IPv4 subnet mask setting that was used
when the machine started up with DHCP.
Active IPv4 Gateway Address
023
This SP allows you to check the IPv4 default gateway setting that was used
when the machine started up with DHCP.
D129/D130 3-124 SM Appendix