Adf 4 - Ricoh D129 Service Manual

Copy Adjustments: Printing/Scanning
4.16.4 ADF
Registration
1. Make a temporary test chart as shown above using A3/DLT paper.
2. Place the temporary test chart on the ADF and make a copy from one of the feed stations.
3. Check the registration, and adjust using the following SP modes if necessary.
Side-to-side: 1st side
Side-to-side: 2nd side
Leading Edge
Leading Edge: 1st side
Leading Edge: 2nd side
Trailing Erase edge:
D129/D130
SP No.
SP6-006-1
0.0 mm ±3 mm
SP6-006-2
SP6-006-3 0.0 mm ±5 mm
SP6-006-5 0.0 mm ±3 mm
SP6-006-6 0.0 mm ±2.5 mm
SP6-006-7 0.0 mm ±10.0 mm
4-116
Rev. 12/27/2012
Specification
SM