Ricoh D129 Service Manual page 64

ARDF Installation (D630)
13. Open the ARDF cover [A].
14. Open the feed-in guide plate [B] and feed-out guide plate [C].
15. Install the stamp [D] into the ARDF.
16. Close two guide plates [C] [B].
17. Close the ARDF cover [A].
18. Attach the decal [A] to the top cover as shown. Choose the language you want.
19. Plug in and turn on the main power switch of the machine, and then check the ARDF
operation.
20. Make a full size copy. Check that the registrations (side-to-side and leading edge) and
image skew are correct. If they are not, adjust the registrations and image skew referring to
the "Copy Adjustments" in the section of the "Replacements and Adjustments".
D129/D130 2-32 SM