Table of Contents
Advertisement
Installation Requirements
2.1.1 ENVIRONMENT
Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Ambient Dust:
1.
Avoid areas exposed to sudden temperature changes:
1) Areas directly exposed to cool air from an air conditioner.
2) Areas directly exposed to heat from a heater.
2.
Do not place the machine where it will be exposed to corrosive gases.
3.
Do not install the machine at any location over 2,000 m (6,500 ft.) above sea level.
4.
Place the main machine on a strong and level base. Inclination on any side should
be no more than 5 mm (0.2").
5.
Do not place the machine where it may be subjected to strong vibrations.
2.1.2 MACHINE LEVEL
Front to back:
Within 5 mm (0.2") of level
Right to left:
Within 5 mm (0.2") of level
D129/D130
10°C to 32°C (50°F to 90°F)
15% to 80% RH
Less than 1,500 lux (do not expose to direct sunlight.)
Room air should turn at least 30 m3/hr/person
Less than 0.10 mg/m3 (2.7 x 10/6 oz/yd3)
2-2
SM
Advertisement
Chapters
Table of Contents
Troubleshooting
