Installation Procedure - Ricoh D129 Service Manual

1-Bin Tray Unit Installation (D632)

2.8.2 INSTALLATION PROCEDURE


Unplug the copier power cord before starting the following procedure.
If the bridge unit (D634) or side tray (D635) has already been installed in the machine, remove it
before installing 1-bin tray unit (D632). This will make it easier for you to do the following
procedure.
1. Remove all tapes.
2. Open the right door of the machine.
3. Remove the front right cover (
4. Remove the paper exit cover (

Keep the screw removed in step 4 for step 5.
5. Install the 1 bin tray unit [A] (
6. Attach the tray support bar [A] to the tray [B] as shown, and then attach the end-fence [C].
D129/D130
p.4-6).
p.4-8).
x 1, x 1 [This screw was removed in step 4]).
2-34 SM