Ricoh D129 Service Manual page 812

System SP Tables-8
807x 3 3 Pages
807x 4 4 Pages
807x 5 5 Pages
807x 6 6 to 10 Pages
807x 7 11 to 20 Pages

For example: When a copy job stored on the document server is printed in document server
mode, the appropriate L: counter (SP8076 0xx) increments.

Printing a fax report counts as a job and increments the F: counter (SP 8073).

Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.

If a job is paused and re-started, it counts as one job.

If the finisher runs out of staples during a print and staple job, then the job is counted at the
time the error occurs.

For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)

The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP 8072).

When printing the first page of a job from within the document server screen, the page is
counted.
T:FAX TX Jobs
These SPs count the total number of jobs (color or black-and-white) sent by
8111
fax, either directly or using a file stored on the document server, on a
telephone line.
Note: Color fax sending is not available at this time.
001 B/W
F:FAX TX Jobs
These SPs count the total number of jobs (color or black-and-white) sent by
8113
fax directly on a telephone line.
Note: Color fax sending is not available at this time.
001 B/W
D129/D130
Black TX
Black TX
3-208
807x 10 101 to 300 Pages
807x 11 301 to 500 Pages
807x 12 501 to 700 Pages
807x 13 701 to 1000 Pages
807x 14 1001 to Pages
[0 to 9999999 / 0 / 1]
[0 to 9999999 / 0 / 1]
SM Appendix