Charge Roller And Cleaning Roller - Ricoh D129 Service Manual

4.6.4 CHARGE ROLLER AND CLEANING ROLLER

1. Drum ( p.4-38)
2. Push the charge roller holder [A] toward the front of the drum (
spring [B].
3. Charge roller [C].

Disengage the charge roller on the right side to remove it. Try to avoid touching the
charge roller.
4. Cleaning roller [D]

Disengage the cleaning roller on the left to remove it.
5. After replacing the charge roller and cleaning roller, check the value of SP2001-001. If it is
not at the standard value (1500), set SP2001-001 to "1500".

If this is not done, the carrier will be attracted to the drum because the charge roller
voltage will be too high.
SM
x 2) and remove the
4-41
PCDU
D129/D130