Main Sp Tables-9; Input Check Table; Copier - Ricoh D129 Service Manual

5.11 MAIN SP TABLES-9

5.11.1 INPUT CHECK TABLE

When entering the Input Check mode, 8 digits display the result for a section. Each digit
corresponds to a different device as shown in the table.
Bit No. 7
Result 0 or 1 0 or 1

Copier

Input Check
5803
Description
001 Tray 1: Paper Size Sensor
002 Tray 1: Tray Set Sensor
003 Tray 1: Paper Lift Sensor
004 Tray 1: Paper End Sensor
Tray 1:
005
Paper Height Sensor 1
Tray 1:
006
Paper Height Sensor 2
007 Tray 2: Paper Size Sensor
008 Tray 2: Tray Set Sensor
009 Tray 2: Paper Lift Sensor
010 Tray 2: Paper End Sensor
SM
6 5 4
0 or 1 0 or 1
See the table 1 following this table.
Not upper limit
See the table 2 following this table.
See the table 1 following this table.
Not upper limit
5-183
3 2 1
0 or 1 0 or 1 0 or 1
Reading
0
Set Not set
Upper limit
No paper Paper remaining
Set Not set
Upper limit
No paper Paper remaining
Main SP Tables-9
0
0 or 1
1
D129/D130