Selecting Finishing Settings - Konica Minolta BIZHUB C203 User Manual

Copy Operations
3.12
bizhub C353/C253/C203 (FE2)
Downloaded From ManualsPrinter.com Manuals

Selecting Finishing settings

Various settings can be selected for sorting and finishing copies fed into the copy output tray.
Note
As the factory default, "Group" is selected.
!
Detail
If no finisher or separator is installed and all of the following conditions are met, printed copies are fed
out and sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
Note
From Administrator Settings mode, the machine can be set so that copies are fed out without being
shifted when the finisher or the separator is installed. As a factory default, the machine is set to shift the
copies that are fed out.
For details on "Center Staple/Fold" or "Center Staple & Fold", refer to "Selecting a folding setting" on
page 3-65.
Setting Description
Sort Select this setting to separate each set of a
multi-page original.
Group Select this setting to separate the copies of
each page in a multi-page original.
Offset If no finisher or separator is installed
If the sorting conditions are met, printed
copies are fed out and sorted in an alternat-
ing crisscross pattern.
If a finisher or a separator is installed
The copies are fed out and stacked on top of
each other with each set shifted to separate
it.
3
3-53