Selecting Finishing Settings - Konica Minolta bizhub C250 User Manual

Basic copy operations
3.12

Selecting finishing settings

Various settings are available for sorting and finishing copies when they are
fed into the copy exit tray.
Note
The factory default setting is "Group".
!
Detail
If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
The "Auto Paper Select" setting is selected.
The "Auto Paper Select" setting is not selected when the "Mixed Original"
setting is selected.
Note
From Administrator mode, the machine can be set so that copies are fed
out without being shifted when the finisher FS-514 is installed. As a fac-
tory default, "Offset by Each Job Setting" is set to "ON". For details on
specifying the setting for offset feeding when the finisher FS-514 is in-
stalled, refer to "System setting" on page 12-27.
C250
3
3-67