Typical Ip Configuration With Vjc-7000-90 - Bosch MIC-7130-PB4 Operation Manual

38 en | Typical System Configurations
12.3

Typical IP Configuration with VJC-7000-90

1
Figure 12.19: Basic configuration with VIDEOJET connect 7000
1 Ethernet (network) cable (Cat5e/Cat6e) (user-supplied) between a Bosch camera and
2 Data-only IP cable (Cat5e/Cat6e) to the head-end network
3 Alarm input / output interface cables (user-supplied)
4 Alarm output cables (user-supplied)
5 120 / 230 VAC, 50/60 Hz
6 Audio input interface cable (user-supplied)
7 External washer pump (user-supplied)
8 Washer output, 2-conductor (user-supplied)
Note: The total length of Cat5e/Cat6 cable must be less than 100 m (328 ft) between the
camera and the head-end system.
2016.07 | 5.0 | F.01U.291.520
1
the port labeled PoE on VIDEOJET connect 7000
Note: The cable to the head-end also can be fiber optic cable from one of the two SFP
slots.
Cat5e/Cat6e = 100 m max.
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems