Bosch MIC-7130-PB4 Operation Manual page 58

58 en | Camera
Gain control
Adjusts the automatic gain control (AGC).
–
–
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
Maximum Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
–
–
AE-response speed
Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium
(default), Fast.
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, use the slider to select a number.
The default is 12.
Shutter Mode
–
–
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for
PAL cameras. The range of settings is from 1/1 to 1/10000.
Maximum automatic exposure
This limits the integration time when Frame Integration is active. The default is 1/4. The range
of settings is from 1/4 to 1/30.
Top shutter speed
The camera tries to hold this shutter value as long as sufficient ambient light is available in the
scene.
Settings range from 1/60 to 1/10000. The default value is 1/10000 for all modes except
'Motion' (default 1/500).
Backlight compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of the
image. The default setting is Off.
High Sensitivity
Adjusts the level of intensity or lux within the image (HD only). Select from Off or On.
Stabilization
Stabilization reduces camera shake in both the vertical and horizontal axis. The camera
compensates for the movement of the image by up to 2% of the image size. This feature is
ideal for cameras mounted on a pole or mast, or on another location that shakes frequently.
2016.07 | 5.0 | F.01U.291.520
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
Fixed: no enhancement. This setting disables the Max. Gain Level option.
Normal
Medium
High (default)
Fixed: The shutter mode is fixed to a selectable shutter speed.
Automatic exposure: increases camera sensitivity by increasing the integration time on
the camera. This is accomplished by integrating the signal from a number of consecutive
video frames to reduce signal noise.
If you select this option, the camera disables Shutter automatically.
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems