Playback; Selecting The Recording Stream; Searching For Recorded Video; Exporting Recorded Video - Bosch MIC-7130-PB4 Operation Manual

98 en | Operation via the browser
22.2

Playback

22.2.1

Selecting the recording stream

On the left side of the browser, expand the Connection group if necessary.
To view a recording stream:
1.
2.
22.2.2

Searching for recorded video

On the left side of the browser, expand the Search group if necessary.
1.
2.
3.
4.
5.
6.
22.2.3

Exporting recorded video

On the left side of the browser, expand the Export group if necessary.
1.
2.
3.
4.
5.
Note:
The target server address is set on the Network / Accounts page.
22.2.4

Controlling playback

The time bar below the video image allows quick orientation. The time interval associated with
the sequence is displayed in the bar in gray. Arrows indicate the position of the image
currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
–
–
–
Controls
Control playback by means of the buttons below the video image.
The time code is displayed on the left above the full-screen icon.
The buttons have the following functions:
–
–
–
–
2016.07 | 5.0 | F.01U.291.520
Click the Recording drop-down arrow to see the options.
Select recording stream 1 or 2.
To limit the search to a particular time range, enter the start and stop date and times.
Select an option from the drop-down box to define a search parameter.
Click Start Search.
The results are shown.
Click a result to play it back.
Click Back to define a new search.
Select a track in the track list or in the search results.
The start and stop date and time are filled-in for the selected track. If required, change
the times.
In the Time lapse drop-down box, select the original or a condensed speed.
In the Location drop-down box, select a target.
Click Export to save the video track.
If required, click in the bar at the point in time at which the playback should begin.
Change the time interval displayed by clicking the plus or minus icons. The display can
span a range from two months to a few seconds.
Click the alarm jump buttons to go from one alarm event to the next or to the previous
one. Red bars indicate the points in time where alarms were triggered.
Start/Pause playback
Select the playback speed using the speed regulator
Jump to start of active sequence or to previous sequence
Jump to start of the next video sequence in the list
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems