Vca - Bosch MIC-7130-PB4 Operation Manual

MIC IP starlight 7000 HD
Notice!
In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in
mind when assigning the profile (see Encoder Profile).
Audio
Select On to activate audio alarms.
18.2

VCA

The camera has integrated Video Content Analysis (VCA), which can detect and analyze
changes in the signal on the basis of image processing. Such changes can result from
movements in the camera's field of view. You can select various VCA configurations and adapt
these to your application as required.
Intelligent Dynamic Noise Reduction (IDNR)
IVA / VCA controls the feature called Intelligent Dynamic Noise Reduction, which reduces
noise based on motion activity in the scene. When there is no motion in the preset scene,
noise reduction is increased. When there is motion detected in the preset scene, noise
reduction is decreased to reduce bandwidth and optimize storage space.
To disable the feature, select the OFF option in the field VCA configuration.
To enable the feature, select a Profile # (1 – 16) or Silent VCA in the field VCA configuration.
If you select a specific profile, you must also select MOTION+ in the field Analysis type.
VCA Profiles
You can configure two profiles with different VCA configurations. You can save profiles on your
computer's hard drive and load saved profiles from there. This can be useful if you want to
test a number of different configurations. Save a functioning configuration and test new
settings. You can use the saved configuration to restore the original settings at any time.
Notice!
If computing power becomes short, the highest priority is always the live images and
recordings. This can lead to impairment of the video content analysis. You should therefore
observe the processor load and optimize the encoder settings or the video content analysis
settings as necessary.
1.
2.
3.
4.
VCA configuration
Select one of the profiles here to activate it or edit it.
You can rename the profile.
1.
2.
The Silent MOTION+ Configuration is active by default. In this configuration, metadata is
created to facilitate searches of recordings; however, no alarm is triggered.
If you select the option Silent VCA, then the system creates metadata to facilitate searches of
recordings but no alarm is triggered. You cannot change any parameters for this configuration.
Bosch Security Systems
Select a VCA profile and enter the required settings.
If necessary, click the Default button to return all settings to their default values.
Click the Save... button to save the profile settings to another file. A new window is
opened, in which you can specify where you want to save the file and what name you
want to save it under.
Click the Load... button to load a saved profile. A new window opens in which you can
select the profile file and specify where to save the file.
To rename the file, click the icon to the right of the list field and enter the new profile
name in the field.
Click the icon again. The new profile name is saved.
Operation Manual
Alarm | en 75
2016.07 | 5.0 | F.01U.291.520