Miscellaneous; Illumination/Wiper - Bosch MIC-7130-PB4 Operation Manual

Hide thumbs Also See for MIC-7130-PB4:
Table of Contents

Advertisement

MIC IP starlight 7000 HD
No white light
Specifically for MIC cameras using the IR/White light illuminator:
Select this check box to prevent activation of the White light illuminator in the corresponding
sectors, such as those which include highways / roads where White light might create a
hazardous situation such as blinding a driver.
When this check box is selected, no White lights will activate for Presets stored in the
corresponding sector.
16.12

Miscellaneous

Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
16.13

Illumination/Wiper

Notice!
The illuminator fields are available only when an illuminator is attached to a MIC7000 camera.
The default intensity for illumination (both IR and White light) is 33%.
IR Illuminators
Controls IR illuminators. When ON, the camera gives a much better image at low light levels.
Options are: On, Off, Auto.
IR intensity
Select the percentage of intensity of the infrared (IR) light.
No white light
Select On to disable the white light illuminators. The options in the field White light
illuminators are disabled.
Select Off to enable white light illuminators.
White light illuminators
Select On to turn on the White light illuminators.
Select Off to turn off the White light illuminators.
White light intensity
Select the degree of intensity of the White light.
White light timeout
Select On to enable a timeout for the White light feature.
Select Off to disable the timeout.
The timeout turns OFF the white lights, after they have been ON but idle for some time, to
help to retain the life of the LEDs.
White light timeout [min]
Select the number of minutes (from 1 to 30) after which the White light will turn off after
activation.
Wiper
Controls the wiper of the MIC cameras. Options are:
Bosch Security Systems
Off: Turns off the wiper.
On: Wiper wipes continuously until deactivated manually, or until it has been on for five
minutes (after which the camera will stop the wiper automatically).
Operation Manual
Camera | en
65
2016.07 | 5.0 | F.01U.291.520

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents