Lens Settings - Bosch MIC-7130-PB4 Operation Manual

MIC IP starlight 7000 HD
–
–
–
Note: This feature is not available on 20x models.
High dynamic range
Select On to activate wide dynamic range, which improves image reproduction in extreme
high-contract scenes.
Select Off to deactivate the feature.
Night mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
–
–
Night mode threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5; default 30). The lower the
value, the earlier the camera will switch to color mode.
Night mode priority
Select the option to which the camera should give priority while in night mode:
–
–
Night mode shutter
Controls the time period for which light is gathered by the collecting device while in night
mode. Values are ¼, 1/8, 1/15, and 1/30; the default is 1/15.
Noise Reduction
Turns on the 2D and 3D noise reduction feature.
Noise Reduction Level
Adjusts the noise level to the appropriate level for shooting conditions. Select a value between
1 and 5.
Intelligent Defog
With the Defog mode feature, visibility can be improved significantly when viewing foggy or
other low-contrast scenes.
–
–
–
16.7

Lens Settings

Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Bosch Security Systems
On - Stabilization is always on.
Off - Stabilization is disabled.
Auto - Stabilization activates automatically when the camera detects vibration greater
than the set threshold.
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
Color: The camera does not switch to Night Mode regardless of ambient light conditions.
Auto (default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
Motion
Color (default)
On - Defog is always active.
Off - Defog is disabled.
Auto - Defog activates automatically as needed.
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
Operation Manual
Camera | en 59
2016.07 | 5.0 | F.01U.291.520