Table of Contents
Advertisement
10
en | Introduction
2
Introduction
–
–
–
–
2.1
Establishing the connection
The unit must have a valid IP address to operate on your network and a compatible subnet
mask. By default, DHCP is pre-set at the factory to On and so your DHCP server assigns an IP
address. With no DHCP server the default address is 192.168.0.1
1.
2.
3.
Note:
If you cannot connect, the unit may have reached its maximum number of connections.
Depending on the device and network configuration, each unit can have up to 50 web browser
connections, or up to 100 connections via Bosch Video Client or Bosch Video Management
System.
2.2
Configuration with Project Assistant app
You can also use the Project Assistant app to complete the initial configuration of the camera.
In order to use this device with the Project Assistant app by Bosch, you must download the
app from the Bosch Download Store, from Google Play, or from the Apple Store.
You can access the app in several ways:
–
–
–
–
2020-10 | 0.1 |
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions that appear.
Scan the QR code from the QIG.
From www.boschsecurity.com, select Support > Apps and Tools > Online Apps - Video >
Bosch Project Assistant app. Select the appropriate operating system, and then click the
appropriate button to download and install the app.
From Google Play Store (play.google.com), search for Bosch Project Assistant. Select the
app from the list. Click the Install button.
From Apple Store (itunes.apple.com), search for Bosch Project Assistant. Select the app
from the list. Click the appropriate button to download and install the app.
Installation Manual
AUTODOME IP starlight 5100i (In-ceiling)
Bosch Security Systems
Advertisement
Table of Contents
