Camera Connections - Bosch MIC-7130-PB4 Operation Manual

28 en | Make Connections - Power and Control
10.4

Camera Connections

All electrical and data connections from the camera are made from the connectors in the base
of the camera.
Figure 10.9: MIC7000 connectors
1 RJ45 (Cat5e/Cat6e) connector (male) (supporting High PoE) for power and
communication between a Bosch model of High PoE Midspan or a VJC-7000-90
2 24 VAC power wires (24 gage) to VG4-A-PSU1 or VG4-A-PSU2 (if not using a PoE
network)
3 Chassis (Earth) ground wire (18 gage) with connector lug
4 RS-485 connections for communication to / from the MIC-ALM-WAS-24
5 Liquid-tight cordgrip in the base of the camera
6 RJ45 coupler (female to female)
Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC
DCA or a MIC wall mount bracket, Bosch recommends using the MIC7000 IP67 Connector Kit
(MICIP67-5pk, sold separately) to protect the connections against moisture and dust particles.
Each kit provides components for connecting as many as 5 MIC7000 cameras.
2016.07 | 5.0 | F.01U.291.520
Description
Operation Manual
MIC IP starlight 7000 HD
Wire Color
Line (L) = Black
Neutral (N) = White
Green
+ = Purple
- = Yellow
GND = Brown
Bosch Security Systems