Pelco Protocol - Bosch MIC-7130-PB4 Operation Manual

MIC IP starlight 7000 HD
Function Command
Key No.
Set "1-256"
Shot "1-256"
Set 100
Set 110
Set 802*
Set 899*
Set 900
Shot 900
Set/Shot 901-999
28.2

Pelco Protocol

Pelco P/D PTZ Commands
The following PTZ commands in Pelco P/D protocols are supported by the Pelco 300
keyboard.
Command
Pan Right
Pan Left
Tilt Down
Tilt Up
ZOOM In
ZOOM Out
Focus Far
Focus Near
Auto Iris
Manual Iris
Auto Pan
NON-PTZ Pelco D Commands
Command Description
33 – Preset Action = Press
Pans the AutoDome 180° (Flip)
Bosch Security Systems
Command
Pre-position Programming
Pre-position Recall
Pre-position Menu
Factory P/T Home Position
Edit Password
Reset ALL
Edit Tour 1 (Standard)
Edit Tour 2 (Custom)
Adds/Removes a Preposition
Shot from Tour 1
Description
Set ###.
Saves the current PTZ values as a preset view.
Shot ###.
Recalls the previously-saved PTZ preset
position.
Enters the Pre-position menu.
Set–Recalibrate home position.
Enters the Edit Password menu.
Restores all settings to original defaults and
clears all user-programmed settings (except for
custom camera titles).
Enters the Standard Tour Scene menu.
Enters the Custom Tour Scene menu.
Set ###–Adds preset.
Shot ###–Removes preset.
Operation Manual
Keyboard Commands | en 119
2016.07 | 5.0 | F.01U.291.520