Recording; Storage Management; Device Manager; Recording Media - Bosch MIC-7130-PB4 Operation Manual

68 en | Recording
17

Recording

17.1

Storage Management

You can record the images from the camera on an appropriately configured iSCSI system.
It is also possible to let the VRM Video Recording Manager control all recording with accessing
an iSCSI system. This is an external program for configuring recording tasks for video servers.
For further information please contact your local customer service at Bosch Security Systems
Inc.
17.1.1

Device manager

An external Video Recording Manager (VRM) system for the unit is configured via the
Configuration Manager. The Managed by VRM box is only an indicator; it cannot be changed
here.
If the Managed by VRM box is checked, you are not able to configure any further recording
settings on this page.
17.1.2

Recording media

Select a media tab to connect to the available storage media.
iSCSI Media
To use an iSCSI system as the storage medium, a connection to the desired iSCSI system is
required to set the configuration parameters.
The storage system selected must be available on the network and completely set up. It must
have an IP address and be divided into logical drives (LUNs).
1.
2.
3.
The Storage overview field displays the logical drives.
Local Media
An SD card inserted in the camera can be used for local recording (not available on some
cameras).
4
The Storage overview field displays the local media.
Note:
SD card recording performance is highly dependent on the speed (class) and performance of
the SD card. An SD card of Class 6 or higher is recommended.
17.1.3

Activating and configuring storage media

Available media or iSCSI drives must be transferred to the Managed storage media list,
activated, and configured for storage.
Note:
A iSCSI target storage device can only be associated with one user. If a target is being used by
another user, ensure that the current user no longer needs the target before decoupling that
user.
2016.07 | 5.0 | F.01U.291.520
Enter the IP address of the required iSCSI destination in the iSCSI IP address field.
If the iSCSI destination is password protected, enter the password into the Password
field.
Click Read.
– The connection to the IP address is established.
If the SD card is password protected, enter the password into the Password field.
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems