MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
10.4
Camera Connections
All electrical and data connections from the camera are made from the connectors in the base
of the camera.
Figure 10.1: MIC7000 connectors
1
RJ45 (Cat5e/Cat6e) connector (male) (supporting High PoE) for power and
communication between a Bosch model of High PoE Midspan or a VJC-7000-90
2
24 VAC power wires (24 gage) to VG4-A-PSU1 or VG4-A-PSU2 (if not using a PoE
network)
3
Chassis (Earth) ground wire (18 gage) with connector lug
4
RS-485 connections for communication to / from the MIC-ALM-WAS-24
5
Liquid-tight cordgrip in the base of the camera
6
RJ45 coupler (female to female)
Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC
DCA or a MIC wall mount bracket, Bosch recommends using the MIC7000 IP67 Connector Kit
(MICIP67-5pk, sold separately) to protect the connections against moisture and dust particles.
Each kit provides components for connecting as many as 5 MIC7000 cameras.
Bosch Security Systems
Description
Installation Manual
Make Connections - Power and Control | en
Wire Color
Line (L) = Black
Neutral (N) = White
Green
+ = Purple
- = Yellow
GND = Brown
2015.12 | 3.0 | F.01U.291.520
19