Table of Contents
Advertisement
14
en | Installation
4.3
Installing the Camera Module
1.
2.
3.
4.
5.
6.
Note: Red arrows are printed on both parts to indicate the right orientation
2023-10 | 01 |
Put the appropriate cables for power, video, alarms, and audio through one of the
access holes;
Pull back the cables until no excess is left;
Put the camera cover on the camera base in the right orientation.
Slightly press the camera base onto the mounting plate until you hear/feel a click.
Make sure that the camera base is secured.
Confirm that the lens module marking "TOP" is facing up. If not, turn the lens module
in the correct orientation to ensure the images shows up correctly in the system or
browser.
Installation Manual
FLEXIDOME corner 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
