Konica Minolta bizhub c650 User Manual page 486

Utility mode
Parameter
Finisher Ad-
justment
C650
Description
Leading Edge Ad- Adjust the starting print position between -3.0 mm
justment (Duplex and 3.0 mm at the leading edge of the paper for
Side 2) the second side during automatic double-sided
copying. Adjustments can be specified for each
paper tray.
Centering (Duplex Adjust the starting print position between -3.0 mm
2nd Side) and 3.0 mm at the left edge of the paper for the
second side during automatic double-sided cop-
ying. Adjustments can be specified for each paper
tray.
Media Adjustment If the print image is flawed (missing print, white spots, or uneven printing) due
to the characteristics of the type of paper that is used, adjust this parameter
between -8 and +7 according to the paper type.
2-Position Staple Adjust the distance (between 128 mm and 160
Pitch Adjustment mm) between staples when printing with the "2
*1
Position" Staple setting ("Staple" and "Center
Staple & Fold").
Center Staple Po- Adjust the stapling position (between -12.8 mm
*1
sition and 12.7 mm) when printing with the "Center Sta-
ple & Fold" setting.
Half-Fold Position Adjust the folding position (between -12.8 mm
*1
and 12.7 mm) when printing with the "Center Sta-
ple & Fold" setting.
Tri-Fold Position Adjust the folding positions (between -12.8 mm
*1
Adjustment and 12.7 mm) when printing with the "Tri-Fold"
setting.
Punch Vertical Po- Adjust the vertical position of the punched holes
sition Adjustment between -5.0 mm and 5.0 mm.
*2
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes between -5.0 mm and 5.0 mm.
*2
ment
Punch Regist Loop Adjust the hole-punching shift for double-sided
*2
Size Adjustment printing and outputting cover pages between -
16.0 mm and 16.0mm.
Punch Unit Vertical Adjust the vertical position of the punched holes
Position Adjust- between - 5 mm and 5 mm for each paper size.
3
ment *
Punch Unit Hori- Adjust the horizontal position of the punched
zontal Position Ad- holes between - 5 mm and 5 mm.
3
justment *
Punch Unit Size Adjust the sensor for detecting the paper edge
3
Detect Sensor * surface when printing with a Punch setting.
1st Z-Fold Position Adjust the 1st folding position between - 12.8 mm
3
Adjustment * and + 12.7 mm for each paper size.
2nd Z-Fold Posi- Adjust the 2nd folding position between - 12.8
3
tion Adjustment * mm and + 12.7 mm for each paper size.
Punch Edge Sen- Adjust the sensors for detecting the paper edges
*2
sor Adjustment when printing with a Punch setting.
Cover Adjust the sensor for detecting the size of paper
Sheet loaded in the paper trays of the post inserter.
Feeder
Size
*4
Adjustment
11
Default Setting
0.0 mm
0.0 mm
128 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
-
0.0 mm
0.0 mm
-
-
11-25