Network Settings - Konica Minolta bizhub c650 User Manual

Utility mode
Authentication Device Settings
Parameter
General Settings
Logoff Settings
!
Detail
The Authentication Device Settings parameters are available only if the optional authentication unit is
installed.
The authentication units of the IC card type and the biometric type cannot be installed at the same time.
If [SSFC] is selected for the IC card type, specify company code and company identification code. For
details, refer to the manual provided with the authentication unit.
Auth/Acct Track Common Setting
Parameter
Logout Confirmation
Screen Display Setting

Network Settings

Parameter
TCP/IP Settings
NetWare Settings
HTTP Server Settings
FTP Settings
SMB Settings
LDAP Settings
E-mail Settings
SNMP Settings
AppleTalk Settings
Bonjour Setting
TCP Socket Settings
Network Fax Settings
WebDAV Settings
Web Service Settings
Detail Settings
C650
Description
Specify the settings for the installed authentication unit.
• Card Authentication: Select the IC card type and op-
eration settings.
• Bio Authentication: Select the beep and operation
settings.
Select whether or not the user is logged off after a scan
or fax is sent or after the copy document is scanned.
Description
Select whether or not to display the logging-off confirma-
tion screen after pressing the [Access] key.
Description
Specify settings for using the network. For details, refer to the User's Guide
[Network Scanner Operations].
11
Default setting
When the authentication
unit (IC card type) has been
installed:
IC Card Type: FeliCa
Operation Settings: Card
Authentication
When the authentication
unit (biometric type) has
been installed:
Beep Sound: ON
Operation Settings: 1-to-
many authentication
Do not log off
Default setting
ON
11-32