Basic copy operations
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
–
If "2-Sided > 1-Sided" is selected, specify the position of the binding margin and the orientation of
the loaded document, otherwise the copies will not be printed as desired.
–
If the binding position for the document is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the document
length is 297 mm or less. If the document length is more than 297 mm, a binding margin along the
short side of the paper is selected.
–
If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
–
For a double-sided document, touch [Binding Position], select the binding position of the document,
and then touch [OK].
3
Touch [Original Direction], select the orientation of the loaded document, and then touch [OK].
C650
2
2-44