Utility mode
Parameter
Default Enlarge Display
Settings
When AMS Direction is In-
correct
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Tri-Fold Print Side
Print Jobs During Copy
Operation
C650
Description
Specify the default copy settings for the Enlarge Display
mode.
This parameter appears if the machine had previously en-
tered the Enlarge Display mode of Copy mode.
•
Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
•
Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Select whether or not printing continues when the paper
and document orientations are different with the "Auto
Zoom" setting selected.
•
Print:
The Zoom setting is automatically set and the copy is
printed on paper of the specified size in the specified
orientation.
•
Delete Job:
The job is deleted, and no copies are printed.
Select whether copies are printed as the document is being
scanned or after the entire document has been scanned
when scanning a document in separate batches or when
scanning a multiple-page document from the original glass.
•
Page Print:
Printing of copies that can be printed begins while the
document is being scanned.
•
Batch Print
Printing begins after all pages of the document have
been scanned.
Select whether an image that exceeds 297 mm in the main
scanning direction (left/right direction on the original glass
and ADF) is rotated when the copies are printed.
•
Allow:
An enlargement rotation is performed. However, this is
applied only when the "Black" Color setting is selected.
•
Restrict:
The enlargement rotation is prohibited, regardless of
the selected Color setting.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while a document is
placed on the original glass.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while a document is
loaded into the ADF.
Select which paper tray is selected when the "Auto" Paper
setting is canceled.
•
Tray Before APS ON:
The paper tray that was being used before the "Auto"
Paper setting was selected is selected.
•
Default Tray:
Tray 1 is used.
Select the default paper tray loaded with paper for the cov-
er pages (front cover), inserted pages and chapter title pag-
es.
Select whether the printed side is on the inside or the out-
side when the page is folded in three.
This parameter is available only if optional Finisher FS-608
is installed.
Select whether or not print data or fax data can be accept-
ed for printing while a copy operation is being performed.
•
Accept:
Print data and fax data can be accepted and printed.
•
Receive Only:
Print data and fax data is printed after the copy opera-
tion is finished.
11
Default Setting
Factory Default
Print
Page Print
Restrict
OFF
ON
Tray Before APS ON
Tray 2
Outside
Accept
11-19