N o t e
Changing Configuration Information
The commands to change configuration information are shown in
Table 3-1.
Commands to change configuration information
Mode
Command
copy <source>
Privileged
<destination>
Exec
write memory
Configuration
The copy command can only be executed from Privileged Exec mode.
Displaying Configuration Information
The following table lists the commands that are useful for displaying the
switch's configuration information. All commands can be run from either the
Privileged Exec mode (
ProCurve(config)#
(
Table 3-2.
Commands to display configuration information
Command
show running-config
show startup-config
Action
Copy between running configuration,
startup configuration, TFTP server, or URL.
Save running configuration to startup
configuration.
ProCurve#
) or from the Configuration mode
).
Action
Show running configuration of the system
Show startup configuration of the system for the next reboot
File and System Management
Maintaining Configuration Files
Table
3-1.
3-3