Configuration Reference
Figure 6-26. The Identity Window
Changing Hub System Information in the Browser Interface
To change hub system information from the Browser Interface, perform the
following steps:
1.
2.
3.
4.
5.
6.
6-60
From the Tab Bar, click on the Configuration Tab. The Browser Interface
displays the Configuration Button Bar.
From the Configuration Button Bar, click on the System Information
Button. The Browser Interface displays the System Information Window.
In the System Name box, type in a string that will help you identify the hub.
In the System Location box, type in a string that will help you identify
where the hub has been placed.
In the System Contact box, type in the name of the key person managing
the hub.
Click on the Apply Changes button.
Note that the
information you
supply here will
be displayed in
the Identity
Window.