HP procurve 8100fl series Management And Configuration Manual page 99

Link Aggregation Configuration
LAG and LACP Configuration Example
Figure 7-3 shows the corresponding configuration on System Red.
vlan 2-101
bridge stp
bridge-priority 2000
aggregator 11
aggregator 22
port-type gigethernet actorkey 50 partnerkey 12
interface GigabitEthernet3/5
no shutdown
lag 11
interface GigabitEthernet3/6
no shutdown
lag 11
interface GigabitEthernet3/8
lacp enable
lacp port-key 50
no shutdown
interface GigabitEthernet3/9
lacp enable
lacp port-key 50
no shutdown
interface GigabitEthernet3/10
lacp enable
lacp port-key 50
no shutdown
interface GigabitEthernet6/5
no shutdown
lag 11
interface GigabitEthernet6/6
no shutdown
lag 11
interface GigabitEthernet6/7
no shutdown
lag 11
interface LAG11
switchport mode trunk
switchport trunk-vlans 2-101
stp enable
stp cost 10
interface LAG22
switchport mode trunk
switchport trunk-vlans 2-101
stp enable
Figure 7-3. System Red Configuration for LAG Aggregation 11 and LACP Aggregation 22
7-9