Changing And Viewing The Snmp Access Configuration - HP ProCurve 2910al Access Security Manual

RADIUS Authentication and Accounting
Using SNMP To View and Configure Switch Authentication Features
ProCurve(config)# snmp-server mib hpswitchauthmib excluded
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Address
---------------------- ---------------- -------------------
Excluded MIBs
hpSwitchAuthenticationMIB
Figure 5-8. Disabling SNMP Access to the Authentication MIB and Displaying the Result
5-22

Changing and Viewing the SNMP Access Configuration

Syntax: snmp-server mib hpswitchauthmib < excluded | included >
included: Enables manager-level SNMP read/write access to the
switch's authentication configuration (hpSwitchAuth) MIB.
excluded: Disables manager-level SNMP read/write access to the
switch's authentication configuration (hpSwitchAuth) MIB.
(Default: included )
Syntax: show snmp-server
The output for this command has been enhanced to display the
current access status of the switch's authentication configuration
MIB in the Excluded MIBs field.
For example, to disable SNMP access to the switch's authentication MIB and
then display the result in the Excluded MIB field, you would execute the
following two commands.
MIB View Write Access
Manager Unrestricted
Community Events Sent in Trap
Indicates that SNMP security MIB
access is disabled, which is the
nondefault setting.
This command disables
SNMP security MIB
access.