VRRP Configuration
Monitoring VRRP
16-10
Monitoring VRRP
The show vrrp command reports information about a VRRP configuration. You
can specify individual VRIDs, or interfaces. You can tailor the display to show
summary information using the show vrrp brief command.
You can focus displayed information using output modifiers to customize the
information returned. For example, to show information about all virtual
routers on GigabitEthernet interface 4/5
ProCurve#show vrrp interface gig 4/5
Interface Gig4/5 - Group 5 ("This_is_VRID_5")
------------------------------------------
Uptime
State
Priority
Virtual MAC address
Advertise Interval
user)
Preempt Mode
Master Down Interval
Primary Address
Associated Addresses
To display VRRP statistics for virtual router 5 on interface GigabitEthernet 4/5:
ProCurve#show vrrp 5
Interface Gig4/5 - Group 5 ("This_is_VRID_5")
------------------------------------------
Uptime
State
Priority
Virtual MAC address
Advertise Interval
user)
Preempt Mode
Master Down Interval
Primary Address
Associated Addresses
To display VRRP information on all interfaces and VRIDs, enter the show vrrp
command in Privileged Exec mode.
Interface is currently down
Init
1 (configured by the user)
00005E:000105
25000 msec(s) (configured by the
enabled delay = 0 msec(s)
75000
10.10.20.1
10.50.50.5
Interface is currently down
Init
1 (configured by the user)
00005E:000105
25000 msec(s) (configured by the
enabled delay = 0 msec(s)
75000
10.10.20.1
10.50.50.5